Single-cell full PTFE photoelectrochemical cell (relatively sealed, bracket type), C026-3

Description

Description:

• The window of the cell is made of quartz glass with a transparency of over 95%.
• The working electrode can use non-standard sample pieces, but they need to cover the hole with fixed area, which is 1cm² (customization is available).
• This electrolytic cell achieves sealing by rotating the back screws to press and tighten the working sample piece to the fixed area holes.
• The counter electrode and reference electrode of this electrolytic cell can be matched as needed, with a diameter of 6mm for the electrode rods, all of which must be of an extended type. Electrodes need to purchase separately.
• This cell is commonly used in three-electrode systems, with volumes ranging from 30ml to 500ml. Customization is available based on requirements.
• The core inside the cover of this electrolytic cell uses a 360-degree rotatable polytetrafluoroethylene (PTFE) material to ensure precise electrode alignment with channels (typically parallel to the optical window). It is sealed by tightening an outer PTFE cover.
• This cell is equipped with an aeration device that allows for gas exchange below the liquid level, catering to different experimental atmospheres.

 Dimension:

All sizes listed are common sizes, can be customized according to requirements.